To access certain features on tripplite.com, you must first log in to your Tripp Lite account.
If you are not a registered user, please register now.
Prices are in US Dollars.
Our product specialists will help you ensure you have the right-sized system to protect your critical equipment. We'll help you plan for future needs, too. We tailor our advice to your level of knowledge and expertise... if you're already an expert, we won't waste your time, but can assist you in moving your project forward. If your project qualifies, we can even visit your site to make sure your 3-phase installation is a complete success.†
Contact our Solutions Team for help today!
* Required fields.
† Site visit eligibility determined by Tripp Lite. May require additional fees.
3-phase Product Specialists are available Monday-Friday, 8 a.m.-6 p.m., Central Time.
A TAA-Compliant product complies with the Trade Agreements Act (19 U.S.C. § 2501–2581), which requires the U.S. Government to procure products that were manufactured in the United States or other authorized countries. TAA-Compliant products are required in federal procurement contracts such as GSA, IDIQ and DOD.
Stand-By UPS systems provides basic battery backup and surge protection.
Line-Interactive UPS systems provide both battery backup and automatic voltage regulation of AC power (boost/cut) to give a greater amount of power protection than a Stand-By UPS.
On-Line UPS systems use a double power conversion system to produce a pure sine wave output and zero transfer time to battery to provide the highest level of power protection.
The UPS Family is the Tripp Lite brand name for a particular type of UPS.
For Stand-By UPS systems, the families are Internet Office, BC Pro® and BC Personal®.
For Line-Interactive UPS systems, the families are SmartPro, OmniSmart™, VS Series, SmartPro® USB, LCD UPS and AVR Series.
For On-Line UPS systems, the family is SmartOnline™ UPS.
Output Volt-Amps (VA) is a measurement of electrical power and is used to size a UPS system for the equipment that will be connected to it.
Rack Height (U Spaces) is a measure of vertical space or the height of equipment mounted in a rack enclosure. 1U is equal to 1.75 inches, 2U is equal to 3.5 inches and so on.
The maximum depth of equipment that can be mounted in afloor-standing or wall-mount rack enclosure cabinet.
PC/Server Connection determines the correct cable kits (e.g. PS/2, USB, VGA, DVI or Cat5) for a KVM Switch based upon how it will be connected to a PC or server on the network.
IP Remote Access is a feature of a KVM Switch that allows a user to monitor and control PCs, servers and other network devices remotely over IP (Internet Protocol).
VESA Pattern (mm) is the standardized dimensions of a 4-hole mounting attachment for displays, monitors or flat panel TVs based on the Video Electronics Standards Association (VESA) standards. There are variations of the VESA pattern based on location, size and weight of the display.
Active cooling uses energy to transfer or remove heat from one area and pass it onto another. Passive cooling does not use energy to cool an area; rather, it employs natural cooling design guidelines, or the addition of thermal barriers, panels or insulation to prevent heat from entering an area.
Phase is used to describe the two main types of alternating current (AC) electric power produced by a utility, generator or UPS system. Single-phase power includes a single AC waveform, making single-phase equipment ideal for lower power density applications with per-rack power consumption levels up to approximately 2.8kVA (120V), 5kVA (208V) or 7.4kVA (230V). Three-phase power includes 3 AC waveforms, making 3-phase equipment better suited for intermediate and high-capacity applications with per-rack power consumption levels that surpass the practical energy limits of single-phase equipment.
Joule Rating is the unit of energy, based upon the International System of Units, by which surge protectors are rated for their ability to absorb surge energy to protect connected equipment. A higher number indicates greater protection and a longer life expectancy.
Hinged Wall Bracket is a mounting device that attaches a wall-mounted rack to a wall. It has adjustable pivots that allow the rack to be locked into a closed or open (90-degree perpendicular) position. It minimizes cable flex and facilitates installation and ease of access.
GFCI Plug is a type of safety outlet that protects against a common type of electrical shock hazard, the ground fault. It contains a ground-fault circuit interrupter (GFCI) device, which quickly disconnects a connected device from the power source in the event of a ground fault.
Seismic Rack is a type of enclosure featuring a rugged welded construction that has been tested to Seismic Zone 4 standards. Seismic Racks provide additional security for locations situated in earthquake-prone areas or are subject to regular vibrations at locations such as airports or industrial environments.
Individual Outlet Switching is a capability of a PDU where individual outlets can be turned on or off remotely to reboot unresponsive equipment, lock out unused PDU outlets to prevent unauthorized use, or enable customized power up/down programming sequences to ensure proper startup of equipment.
NIAP-Certified Secure identifies a KVM that meets the strict requirements set by the National Information Assurance Partnership (NIAP) regarding the security of KVMs to safeguard data from accidental transfer or unauthorized access.
Pure Sine Wave Output is virtually identical to the smooth arc typically associated with a utility-produced sine waveform. It allows equipment to run cooler, last longer and operate without malfunctions and reduced performance. It also ensures maximum compatibility with sensitive electronics.
Multi-User is a capability of a KVM switch that permits more than one user to control different network devices simultaneously but not concurrently.
Dual Input Cords provide connection to separate primary and secondary power sources for PDUs with Automatic Transfer Switching (ATS) functionality. If there is a loss of the primary power source, the ATS will switch to the secondary power source to maintain power to the connected equipment until the primary power source returns.
Digital Load Meter is a local display on metered, monitored, switched and ATS power distribution units (PDUs) that reports output power consumption in amps in order to facilitate load balancing and avoid overloads.
Cat5 KVM Switch is a device designed to enable users to control multiple computers or network equipment connected via Cat5 cabling.
All PDUs including Basic PDUs provide reliable rack-mount power distribution for data centers, server rooms, and network wiring closets.
Metered PDUs monitor load levels to avoid potential overloads via a LCD display.
Monitored PDUs remotely monitor voltage, frequency, and load levels via a built-in network connection.
Switched PDUs can securely control individual outlets remotely to enable the rebooting of unresponsive equipment to minimize downtime.
ATS PDUs provide redundant power to connected equipment with separate primary and secondary power sources.
Hot-Swap PDUs have dual input power cables to enable live-replacement of select UPS systems with no power interruption to connected equipment.
The total power draw (in Watts) of all equipment connected to the UPS.
You can usually find information about your equipment's wattage requirements from the manufacturer's documentation or the equipment nameplate. (If the power requirements are listed in amps, multiply by the input voltage to find the wattage.) For assistance with UPS sizing, contact our application specialists at email@example.com or 888.447.6227.
The number of minutes (expressed as a range) the UPS will be required to power your equipment in the event of a power outage. If you have generator power, this will be the amount of time necessary to switch to generator power. If you don't have a generator, the UPS should be capable of powering devices for the duration of the outage.
Reset All Filters
1000W PowerVerter APS 12VDC 120V Inverter/Charger with Pure Sine-Wave Output, Hardwired.
1250W PowerVerter APS 12VDC 120V Inverter/Charger with Auto Transfer Switching, 2 Outlets.
2000W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired.
2000W PowerVerter APS 12VDC 120V Inverter/Charger with Pure Sine-Wave Output, Hardwired.
2400W PowerVerter APS 24VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired.
2400W PowerVerter APS 48VDC 120V Inverter/Charger with Auto-Transfer Switching, Hardwired, UL.
3600W PowerVerter APS 36VDC 120V Inverter/Charger with Auto-Transfer Switching, Line-Interactive AVR.
700W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, 1 Outlet.
750W PowerVerter APS 12VDC 120V Inverter/Charger with Auto-Transfer Switching, 2 Outlets.
2000W APS INT Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, Hardwired.
2400W APS INT Series 24VDC 230V Inverter/Charger with Auto-Transfer Switching, Hardwired.
3600W APS INT Series 36VDC 230V Inverter/Charger with Auto-Transfer Switching, Line-Interactive AVR.
1000W APS X Series 12VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired.
1250W APS X Series 12VDC 230V Inverter/Charger with Auto Transfer Switching, 2 C13 Outlets.
2000W APS X Series 12VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired.
3000W PowerVerter APS 24VDC 230V Inverter/Charger with Pure Sine-Wave Output, Hardwired.
4000W PowerVerter APS X Series 48VDC 220/230/240V Inverter/Charger with Pure Sine-Wave Output, ATS, Hardwired.
6000W PowerVerter APS X Series 48VDC 208/230V Inverter/Charger with Pure Sine-Wave Output, AVR, Hardwired.
750W APS X Series 12VDC 230V Inverter/Charger with Auto-Transfer Switching, 2 C13 Outlets.
1250W 12VDC PowerVerter Ambulance/EMS Inverter/Charger with 2 Hospital Grade Outlets.
300W Medical-Grade Mobile Power Retrofit Kit with 90 Amp-hour Battery and 3 Outlets.
300W Medical-Grade Mobile Power Retrofit Kit with 36 Amp-hour Battery and 3 Outlets.
300W Medical-Grade Mobile Power Retrofit Kit with 54 Amp-hour Battery and 3 Outlets.
300W 230V Medical-Grade Mobile Power Retrofit Kit with 90 Amp-hour Battery and 1-C13 Outlet.
PowerVerter 2000W 120V 12VDC RV Inverter/Charger with Auto-Transfer Switching, Hardwired, UL458.
1000W PowerVerter Compact Inverter for Trucks with 4 Outlets.
100W PowerVerter Ultra-Compact Car Inverter with Outlet, 12V CLA Receptacle, and 2 USB Charging Ports.
1250W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets.
150W PowerVerter Ultra-Compact Car Inverter, with 1 Outlet.
1800W PowerVerter Compact Inverter with 2 GFCI Outlets.
1800W PowerVerter Automotive/Truck Inverter with 4 Outlets.
2000W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets.
200W PowerVerter Ultra-Compact Car Inverter with 2 Outlets and 2 USB Charging Ports, Cup Holder Design.
200W PowerVerter Ultra-Compact Car Inverter with Outlet and 2 USB Charging Ports.
2400W PowerVerter Plus Industrial-Strength Inverter with 2 Outlets.
3000W PowerVerter Plus Heavy-Duty Inverter with 4 GFCI Outlets.
3000W PowerVerter Compact Inverter for Trucks with 4 Outlets.
375W PowerVerter Ultra-Compact Car Inverter with 2 Outlets.
400W PowerVerter Ultra-Compact Car Inverter with 2 AC/2USB - 3.1A/Battery Cables/Cigarette Ligther Adapter (CLA).
PV4IN1 4-in-1 Mobile Charger.
700W PowerVerter Ultra-Compact Inverter with 3 Outlets.
375W INT Series Ultra-Compact Car Inverter with 1 Universal 230V 50Hz Outlet.
1000W PowerVerter RV Inverter/Charger with Hardwire Input/Output.
1250W PowerVerter RV Inverter/Charger with Hardwire Input/Output.
1500W PowerVerter RV Inverter/Charger with Hardwire Input/Output.
3000W PowerVerter RV Inverter/Charger with Hardwire Input/Output.
750W PowerVerter RV Inverter/Charger with Hardwire Input/Output.
PowerVerter 120V 1250W Utility/Work Truck 12VDC Inverter/Charger, 2-NEMA 5-15R GFCI.
PowerVerter 120V 2000W Utility/Work Truck 12VDC Inverter/Charger, 2 NEMA 5-15R GFCI.
PowerVerter 120V 750W Utility/Work Truck 12VDC Inverter/Charger, 2-NEMA 5-15R GFCI.
Products of this type may not be available in your country
Show all products available in my country
Tripp Lite is a manufacturer of solutions to power, connect, secure and protect equipment for IT environments. From the largest data center to the smallest home office, Tripp Lite products keep your equipment running effectively and efficiently. Outstanding reliability, competitive pricing and exceptional service have been Tripp Lite trademarks for over 90 years.
1111 West 35th Street
Chicago, IL 60609
+1 773.869.1773 (sales)
+1 773.869.1234 (support)
+1 773.869.1111 (main)
All product and company names are trademarks or registered trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.
Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies.