60-Amp DC Power Supply - Precision Regulated AC-to-DC Conversion

Model Number: PR60


  • Smaller footprint maximizes operating space
  • Crowbar overvoltage protection prevents damage to connected equipment due to overvoltages
  • Automatic time-controlled overcurrent protection in case of overload
  • Solid state, integrated circuit maintains excellent regulation of output voltage

Precision regulated DC power supplies are ideal for commercial/land-mobile, ham and CB radios, test bench supplies, base stations, tape players and amplifiers. Designed for years of reliable service and superior performance, they efficiently convert 120 volts AC into 13.8 volts DC (+/-0.5V). The Trim Line Series of DC power supplies offers a low-profile design with a footprint that matches the most popular radios on the market, such as Motorola, Radius, GE Monogram Series and EF Johnson models. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Key Features

  • Smaller footprint maximizes operating space
  • Crowbar overvoltage protection prevents damage to connected equipment due to overvoltages
  • Current-limiting electronic foldback enables time-controlled automatic overcurrent protection in case of overload
  • Solid state, integrated circuit maintains excellent regulation of output voltage
  • Regulated output voltage maintains up to 95% of no load value
  • High quality filtering creates very low ripple/low noise operation
  • Heavy-duty power transformer provides complete isolation from noise on incoming AC power
  • Large heat sinks and vented cabinets supply cool operation for continuous use and long life of the unit
  • Illuminated on/off switch
  • Connectors: Hardwire terminals / Red positive (+), Black negative (-)
  • Working Temperature Range: 0° C to 40° C (32° F to 104° F), 0 to 95% humidity, non-condensing
  • Storage Temperature Range: -15° C to 50° C (5° F to 122° F)
  • LED Indicators: Red LED indicates that DC output is being provided
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Typical Applications

250/300 watt transmitters, VHF/UHF ham radios, commercial/land-mobile radios, multi-piece equipment installations, microwave radio applications, test bench equipment, point-of-sale displays, aquariums

OUTPUT

Output Capacity Details Intermittent Communications Service (ICS) Amps - 60Continuous Duty Amps - 42

UPC ASSIGNMENT

Unit Carton UPC# 037332060082

PHYSICAL

Unit Dimensions (HWD/in) 6.75 x 10.5 x 11.5
Unit Dimensions (HWD/cm) 17.15 x 26.67 x 29.21
Unit weight (lbs) 33
Unit weight (kg) 14.97

WARRANTY

Product Warranty Period (Worldwide) 1-year limited warranty

† Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies.

PR60 4.7 5 3 3
Great product The PR- 60 converter works very well. We use it to life test 12 volt pumps and we run it 1000 hours at a time. It holds up great. Be careful handling the converter it is heavy and if you tip it toward the plastic fuse holder, it will break. If you don't notice you have broke the fuse holder and you turn it on, you can damage the converter. December 30, 2013
Supurb manufactor this power supply is great for the money it is by far the best. well made and constructed.. simple to use self explanatory even for not so savoy person... March 10, 2013
Power up an entire 12v display 115v to 12v converter used to power up and entire display of electronics. Works really great, unless you get hit by lighting January 11, 2013
1-3 of 3
(5 Questions : 5 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
1 year, 3 months ago
Customer avatar
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your inquiry. The PR60 supports 60 ICS amps and 48 continuous duty amps.
1 year, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Looking to run a 12v 50 amp cab heater in my truck for a couple hours?
1 year, 2 months ago
Customer avatar
by
Staphord
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
Thank you for your inquiry. The PR60 will not run at 50amps for the time you require. The PR60 only runs 48amps continously. It will support an initial end-rush of 60amps but only for a short period of time.
1 year, 1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
The originals are two 4-pin bridge rectifiers with this information on them: PEC70CT01P "9042" ...2 positive terminals and 2 AC terminals. Can only find the + and - terminals. Can you help me please?
7 months ago
Customer avatar
by
Motorgator
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The PR60 has a 1 year limited warranty, and as a best practice we don't recommend replacement of the individual parts.

For additional information please reach out to our main product support team at 773-869-1233 option 3 or techsupport@tripplite.com.
7 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
5 months ago
Customer avatar
by
jsbach
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The PR60 is the largest DC power supply in te Tripp Lite offering at this time, and there is no way to parallel two of these together.

For additional information, please reach out to our presales applications team at 773-869-1234 option 1 or presaleshelp@tripplite.com.
4 months, 4 weeks ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 months, 1 week ago
Customer avatar
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The continuous duty amps on the PR60 is 42 amps.
2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1

Product Warranty

This product has a 1-year limited warranty. Get more information

More Support Resources for PR60

Do you own a PR60?

Get all your support resources in one place.

go to model support

How can we improve the information on this page? Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.