• Home
  • Products
  • Racks & Cooling
  • Floor-Standing Rack Cabinets
Server Rack Enclosure Cabinet 25U

25U SmartRack Premium Enclosure (includes doors and side panels)

Model Number: SR25UB


  • Ships fully assembled
  • Standard 24" width (600mm)
  • Standard 42" depth (1050mm)
  • 4 interior vertical posts with non-threaded square hole openings
  • 3000 lb stationary / 2250 lb rolling load capacity
  • Locking, removable, reversible front and rear doors
  • Locking, removable side panels
  • Includes equipment mounting hardware
  • Meets all enclosurerequirements towards PCI DSS (Payment Card Industry Data Security Standard)compliance

Tripp Lite’s SR25UB premium SmartRack Enclosure Cabinet is packed with features designed to simplify rack equipment installations and rack equipment maintenance: top and bottom cable routing ports, perforated door and side panels to promote efficient airflow, adjustable vertical mounting rails and more. And as part of the SmartRack family, the SR25UB is compatible with Tripp Lite’s extensive range of rackmount accessories, enabling you to customize your solution to meet any requirement. The SR25UB ships fully assembled for quick installation and comes with a 5-year warranty.

The SR25UB has 25U of capacity and is compatible with all standard 19-inch rack equipment. The front and rear pairs of vertical rails feature square mounting holes and are numbered by rack space for easy reference. The rails are adjustable in quarter-inch increments to accommodate equipment depths from 4 to 37 inches. Adjustment is quick and convenient: simply unscrew the rails, slide them to the desired depth and restore the screws. The rails feature square mounting holes and are capable of supporting up to 3000 lb of equipment with included installation hardware (2250-lb rolling capacity).

With a locking, reversible front door and locking, removable side panels, SR25UB provides safe, secure installation for all equipment. This prevents unauthorized access to installed equipment while making it easy for authorized personnel to perform inspections, maintenance and equipment replacement. The enclosure meets all requirements toward PCI DSS compliance.

The top and bottom panels of the SR25UB are furnished with vents designed to help remove warm air from the enclosure and draw in cool air by convection. They also support installation of standard user-supplied case fans (Tripp Lite SRFANROOF). The top and bottom panels are also provided with ports for cable routing.

To simplify deployment, the SR25UB comes with casters that enable it to be maneuvered into to desired location, and then secured in place by adjusting the unit’s levelers. Note: the casters are intended for minor position adjustments within the final installation area only and are not designed for moving the enclosure over long distances.

Key Features

  • Ships fully assembled for rapid deployment and roll into place on heavy-duty pre-installed casters (casters are removable)
  • Front and rear sets of equipment mounting rails adjust in 1/4" increments. The easy-view depth index ensures consistent rail placement without requiring time-consuming measurements
  • Tool-less accessory mounting rails (2 rails per enclosure) include slots for quick installation of compatible PDUs and vertical cable managers. Mounting slots are arranged in an industry-standard pattern compatible with a wide variety of accessories. Each rail can accommodate two vertical PDUs or cable managers side-by-side (four items per enclosure)
  • Enclosure includes mounting hardware of 50 pieces of M6 cage nuts and 50 pieces of M6 screws
  • Textured powder coat finish for tough resistance to environmental concerns such as deployment in warehouses
  • Massive front to rear ventilation capacity. 65+% open space in door perforation pattern meets or exceeds server manufacturer requirements
  • Maximum usable internal depth of 37 inches/94 cm (front to rear rail)
  • Weight ratings of 3000 lb stationary and 2250 lb rolling
  • Front door is locking, reversible and removable
  • Rear doors are locking and reversible. Split rear door design reduces clearance requirements for service entry allowing the enclosure to be placed closer to a wall
  • Locking removable side panels are 'half size' to make them smaller and lighter improving ease of installation and servicing. Side panels are keyed alike to the front and rear doors
  • Built in baying tabs allow enclosures to be combined securely in rows. Center-to-center width can be set at 600mm or 24" to match standard data center floor tiles
  • Leveling feet extend to allow enclosure to be positioned on uneven floors. Levelers are removable
  • Convenient grounding system. All components are grounded to the enclosure frame which includes multiple connections for facility ground. Front and rear doors include quick-release ground wires
  • Open bottom for cable access
  • Top panel has generous cable access holes. Panel can be removed without the use of tools in seconds without having to disconnect cables first
  • Included stabilizing brackets are used for shipment and can be reattached at the bottom of the enclosure frame on the inside or outside of the rack
  • Compatibility with airflow optimization accessories as well as cable management accessories
  • Meets all enclosure requirements towards PCI DSS (Payment Card Industry Data Security Standard) compliance

Package Includes

  • SR25UB Rackmount Enclosure
  • (2) Side panels
  • (2) Side panel locks
  • (50) M6 screws
  • (50) M6 cage nuts
  • (50) M6 washers
  • (2) Door & side panels
  • Owner's Manual

PHYSICAL

Installed whole system maximum rack depth (inches) 37
Installed whole system maximum rack depth (cm) 94.0
Installed whole system minimum rack depth (inches) 4
Installed whole system minimum rack depth (cm) 10.16
Rack Height 25U
Shipping Dimensions (HWD/in) 55 x 27.75 x 47
Shipping Dimensions (HWD/cm) 139.7 x 70.48 x 119.38
Shipping weight (lbs) 237
Shipping weight (kg) 106.65
Unit Dimensions (HWD/in) EXTERNAL DIMENSIONS: 49 x 23.63 x 43
Unit Dimensions (HWD/cm) 124.46 x 60.02 x 109.22
Unit weight (lbs) 195
Unit weight (kg) 88
Color Black
Style Floor Standing
Weight Capacity - Stationary (lbs) 3000
Weight Capacity - Rolling (lbs) 2250
Weight Capacity - Stationary (kg) 1360.8
Weight Capacity - Rolling (kg) 1020.6
Factory preset rack depth (cm) 70.49
Factory preset rack depth (inches) 27.75

SPECIAL FEATURES

Grounding lug Front and back door frames

CERTIFICATIONS

Certifications UL60950; RoHS; CE
NOM (Mexico) Tested to NOM (Mexico)
Approvals EIA/ECA-310-E

WARRANTY

Product Warranty Period (Worldwide) 5-year limited warranty

† Tripp Lite uses primary and third-party agencies to test its products for compliance with standards. See a list of Tripp Lite's testing agencies.

SR25UB 4.5 5 4 4
Best product for price Quality product, quality workmanship, I could not have asked for a better rack cabinet! All the usually options of reversible door, removable sides and back, and much more! September 5, 2013
Overall is a great shorter enclosed rack. The doors and sides are easily removed for easier installation. The rails adjusted well, and equipment installed quickly. The only reason it's not a five star is more from my experience in getting it. When it came in all wrapped up on a pallet, I couldn't tell that one of the back door hinges was bent. After contacting support, who were super helpful, instead of just shipping me the hinge piece, they shipped a whole new rack, and suggested I only open it enough to take the hinge off and ship it back. February 28, 2013
Great rack! Great rack! Solid design. All four sides lock and are removable including the doors. The front door is reversible, you just need to move the hinges to the other side. Has casters and stabilizing feet that raise and lower. Very happy with this product. February 1, 2013
Good product overall with a few issues. Came assembled excluding the side panels. Packaged/crated very well. Installation of various types of components was relatively easy. Installing the levers on the side panels was ridiculously difficult. The U stripe stickers going down on each side in the front were applied incorrectly. The two 'complimentary' blank U panels do not fit a 19" rack. They're not wide enough to snap into both sides. The tabs are very delicate. The first attempt at snapping in a panel, broke off one of the tabs. Overall the rack serves it's purpose and works well for our needs. November 27, 2012
1-4 of 4
(5 Questions : 5 Answers)

Product Q&A

Ask your questions. Share your answers.

 
 
« Back
 
 
Has staff answer
 
1 answer

Can I order other doors?

I have swapped the front door and twin rear doors, but I would like to replace the single, full width door with a set of twin half width doors?

How can I do this?
 
Products related to my question
 
 
 
1 year, 9 months ago
Customer avatar
by
trinityraven
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We appreciate your interest in our Rack Solutions line of products.

If you'd like to discuss your application and how you’ll use this product further, our Chicago-based team of tech support experts is available to work with you at your convenience online and via phone or fax:

Online Pre Sales Support
Phone: 773.869.1234
Fax: 773.869.1177

Thanks again for your interest in Tripp Lite. Your satisfaction is our top priority
1 year, 8 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

Air Conditioning

I want to add a third party top mount air conditioner to this unit.

Can this be done. Is the unit air tight enough to be able to avoid significant air infiltration and humidity problems.

Basicall I will have about 2-3000W of server equipement, and would like to add a top mount 4-12000BTU variable air conditioner
1 year, 2 months ago
Customer avatar
by
Robert
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We appreciate your interest in our Cooling Solutions line of products. Please note that the SR25UB is NOT "airtight" as we need the perforated front and read doors in order to maximize the "front-to-rear" airflow typically advocated by device manufacturers. Instead, consider utilizing our SRCOOL12K spot-cooler for a self-contained 12K BTU capacity cooling solution.

If you'd like to discuss your application and how you’ll use this product further, our Chicago-based team of tech support experts is available to work with you at your convenience online and via phone or fax:

Online Pre Sales Support
Phone: 773.869.1234
Fax: 773.869.1177

Thanks again for your interest in Tripp Lite. Your satisfaction is our top priority!
1 year, 2 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 month ago
Customer avatar
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The SR25UB has a mesh front door. However depending on the application and quantity, we may be able to provide a plexiglass front door for the enclosure.

For additional info please reach out to our presales applications team at 773-869-1773 or presaleshelp@tripplite.com.
1 month ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Has staff answer
 
1 answer

Accessories

Cah i get the SR25UB with Solid Front and Read Doors and Locking??

I also need a roof Fan or a fan kit....

And Fixed cantalivered shelf
 
Products related to my question
 
 
 
2 years, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TshinnB2B is loaded.
Additional information about TshinnB2B could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
We appreciate your interest in our Rack line of products. Please note that we utilize perforated front and rear doors in order to optimize the "front-to-rear" airflow as recommended by device manufacturers.

Consider utilizing our SRFANROOF for a 420CFM chimney effect via 6 high performance fans utilizing a standard 5-15P AC plug in a toolless mounting formfactor!

Also consider our SRSHELF2P and SHSHELF2P1U for cantilevered 2-post mounted shelving solutions.

Our Chicago-based team of tech support experts is available to work with you at your convenience online and via phone or fax:

Online Pre Sales Support
Phone: 773.869.1234
Fax: 773.869.1177

Thanks again for your interest in Tripp Lite. Your satisfaction is our top priority.
2 years, 3 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Item Dimensions L x W x H 28 x 10 x 19.25 inches
6 months ago
Customer avatar
by
curiouscreature
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0

Answers

Answer: 
The SR25UB has a maximum usable internal depth of 37 inches and will comfortably house the PE2950 III.

Along with the enclosure we also have various products that will work with the server to provide a complete solution.

If looking for items such as a UPS, PDU, additional accessories for the SR25UB; please reach out to our presales applications team at 773-869-1773 or presaleshelp@tripplite.com.
6 months ago
Customer avatar
by
Read all my Q&A
 
Please wait while more information about TrippHelp is loaded.
Additional information about TrippHelp could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1

[FAQ-983] Does any rackmounting equipment come with the SR25UB?

Qty. 50 nuts and bolts come with the SR25UB for rackmounting products. [Last Updated: Nov 27, 2013]

Was this answer helpful?

Looking for a TAA version of this model?

See SR25UBTAA

Do you own a SR25UB?

Get all your support resources in one place.

go to model support

How can we improve the information on this page? Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.