Voltage Incompatibility
This product is not compatible with the voltage in your country. [MP004]
300W 230V Medical-Grade Mobile Power Retrofit Kit with 90 Amp-hour Battery and 1-C13 Outlet
- Provides IEC 60601-1 compliance for connected mobile equipment (used in every sector of healthcare facilities, both inside and outside of patient-care areas)
- Adds reliable mobile AC power source to medical carts
- Saves money by upgrading new or existing non-powered carts for a fraction of the cost of buying new powered models
- Simultaneously powers connected equipment while recharging batteries
- Includes everything needed to retrofit a cart: mobile power supply, 90 amp-hour user-replaceable battery module, PowerAlert data-saving software, remote user interface (RUI) and mounting hardware kit
- 2-year power module and 6-month battery module limited warranty
HCRK-INT
Have a Question?
Overview
Features
- Provides IEC 60601-1 compliance for connected mobile equipment (used in every sector of healthcare facilities, both inside and outside of patient-care areas)
- Adds reliable mobile AC power source for medical carts
- Medical-Grade Mobile Power Supply (included) features an isolation transformer, providing IEC 60601-1 compliance for connected equipment
- The Power Supply's advanced 3-stage charger recharges batteries faster and safer than conventional chargers
- The Power Supply's internal Automatic Transfer Switch (ATS) allows the power supply to simultaneously run connected equipment while recharging the battery module
- The Power Supply also features 1 IEC-320-C13 AC outlet, an 8-in. AC input cord with a hospital-grade IEC-320-C14 plug, a USB communication port and a compact, all-metal housing that stands up to the most demanding environments
- 90 amp-hour user-replaceable battery module (included) provides long-lasting mobile power. Maintenance-free, spill-/leak-proof sealed lead-acid (SLA) AGM battery features simple, plug-in connection with included cable
- Remote User Interface (RUI) displays output and battery charge status at a glance. Includes on/off and alarm-mute switches. Mounts anywhere on the cart for easy access with included mounting material and cable
- Mounting Hardware Kit retrofits most standard medical carts from AFC, Anthro, Datalux, GCX, Hergo, Jaco, Knurr, Stinger, Infologix and more
Specifications
OVERVIEW
UPC Code | 037332136619 |
INPUT
Nominal Input Voltage(s) Supported | 230V AC |
Recommended Electrical Service | 15A, 230V |
Input Connection Type | IEC-320-C14 |
Input Cord Length Details | 8-in IEC-320-C14 |
Voltage Compatibility (VAC) | 230 |
Voltage Compatibility (VDC) | 12 |
OUTPUT
Frequency Compatibility | 50 Hz |
Pure Sine Wave Output | No |
Output (Watts) | 300 |
Nominal Output Voltage(s) Supported | 230V |
Output Receptacles | (1) C13 |
Continuous Output Capacity (Watts) | 300 |
Peak Output Capacity (Watts) | 750 |
BATTERY
Full Load Runtime (min.) | Up to 12 hours typical runtime in standard configuration. Runtime varies depending on battery condition and load |
DC System Voltage (VDC) | 12 |
Battery Charge | Equal to discharge time. Includes advanced 3-stage (10A) battery charger |
USER INTERFACE, ALERTS & CONTROLS
Front Panel LEDs | On Remote User Interface (RUI): Output AC Power, Battery Charge Level and Battery Charging Status |
Switches | On Remote User Interface (RUI): On/Off Switch and Alarm-Mute Switch |
Audible Alarm | Low Battery Alarm |
SURGE / NOISE SUPPRESSION
EMI / RFI AC Noise Suppression | Yes |
PHYSICAL
Cooling Method | fan |
Form Factors Supported | Retrofits most standard medical cart configurations |
Material of Construction | Metal (Power Supply and Battery Module) |
Shipping Dimensions (hwd / in.) | 13.25 x 15.00 x 21.50 |
Shipping Weight (lbs.) | 89.10 |
Unit Dimensions (hwd / in.) | Power Supply: 11.5 x 6 x 3.5 in. Battery Module: 14.5 x 8.5 x 7 in. |
Unit Weight (lbs.) | 75.9 |
COMMUNICATIONS
Network Monitoring Port | USB |
STANDARDS & COMPLIANCE
Certifications | Tested certified and compliant to IEC 60601-1, CAN/CSA-C22.2 No. 601.1-M90 and UL 1778 by TUV |
WARRANTY
Product Warranty Period (Worldwide) | 2-year power module and 6-month battery module limited warranty |
Related Products
Power Inverter Accessories
Model Number | Description | |
---|---|---|
![]() |
BP12V82 | 12V DC, 90-Amp Replacement Battery for HCRK and HCRK-INT Medical-Grade Mobile Power Retrofit Kits |
Resources & Downloads
Documentation
Product Literature
Useful Web Pages
Product Images
How can we improve the information on this page?
Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.