Model Number: EURO-4

Isobar 4-Outlet 200-240V Surge Protector, 2M Cord, 680 Joules

$5300

109801

$5399

12-228-456

$6052

B00006HZ4M

$4999

05596422

$5621

TRPS04U

$4899

884287

$6799

EURO-4

$4899

884287

$5799

191962


Overview

For more than 20 years, America's leading companies have trusted Tripp Lite's Isobar Premium surge and noise suppressors to protect sensitive computer, networking and telecom equipment. With more than 18 million satisfied customers, the Isobar remains the world's #1 selling premium surge suppressor. Loaded with a generous combination of high quality components, near indestructible all-metal case and unique noise filtration system, the isobar offers the highest level of protection attainable in a multi-outlet strip. Robust surge suppression circuits with sine-wave tracking offer extreme levels of protection against the heaviest surge conditions exceeding IEEE 587 category A & B specifications. Isobar's unique protection system combines large torroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference, even noise generated by other pieces of connected equipment. EURO-4 offers 4 outlets arranged in two filter banks to prevent system crashes, reboots and performance problems common as noisy system peripherals are powered off and on. Surge suppression rated at 680 joules offers network-grade protection. Widely spaced IEC320-C13 outlets accommodate up to 2 large transformer plugs without blocking outlets. Detachable IEC-320 C14 inlet connection accepts a variety of detachable cordsets to match country or site-specific wall receptacles. Two-meter C13 to C14 interconnection cable and keyhole mounting tabs included. PLUG/OUTLETS: Input: IEC320 C14 inlet/Output: 4 IEC320 C13 outlets/2m C13 to C14 interconnection cable included ELECTRICAL: 200-240V AC, 50/60Hz (Use at 120V supported) SUPPRESSION: AC: 300V RMS Clamping/680 joules FORMAT: Corded all-metal strip with transformer spaced outlets

Features

  • Tripp Lite's ISOBAR is the world's #1 selling premium suppressor series with more than 18 million satisfied customers and a safety-tested history of 20+ years
  • Robust surge suppression with sine-wave tracking protects against the heaviest of surge conditions, exceeding IEEE category A&B specifications
  • Multi-component suppression circuits combine torroidal chokes, ferrite rod-core inductors, HF/VHF capacitors and multiple layers of metal oxide varistors into exclusive isolated filter banks that remove EMI/RFI interference, even noise from other pieces of connected equipment.
  • 4 outlets arranged in two filter banks prevent system crashes, reboots and performance problems common as noisy peripherals are powered off and on.
  • Network grade surge suppression rated at 680 joules
  • Widely spaced outlets accommodate up to 2 large transformer plugs without blocking outlets
  • Lighted power switch confirms power on/off status
  • 2m C13 to C14 interconnection cable included
  • Keyhole mounting tabs for installation in a wide variety of applications
  • 200-240VAC, 50/60Hz electrical compatibility

Package Includes

  • EURO-4 premium surge suppressor
  • Instruction manual with warranty information
RoHS compliant

Specifications

OUTPUT
Frequency Compatibility 50 / 60 Hz
Output Receptacles (4) C13
Circuit Breaker (amps) 9
INPUT
Nominal Input Voltage(s) Supported 230V AC
Recommended Electrical Service 230V (220-250V)
Input Connection Type IEC-C14 inlet connection accepts a variety of detachable cord sets to match country or site-specific wall receptacles
Input Plug Features Includes 1 detachable IEC-320 C13 to C14 cable
Input Cord Length (ft.) 6
Voltage Compatibility (VAC) 220-250
Maximum Surge Amps 15000
Right-Angle Plug Yes
USER INTERFACE, ALERTS & CONTROLS
Switches Two position orange illuminated on/off power switch
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 680
AC Suppression Response Time NM = 0 ns. CM = <1 ns
Protection Modes Includes full normal mode (H-N) and common mode (N-G / H-G) line surge suppression
Clamping Voltage (RMS) 300
AC Suppression Components Used Metal oxide varistors, toroidal balanced chokes, ferrite rod-core inductors and VHF capacitors.
Isolated Filter Banks Unique isolated filter bank design offers additional filtering between each pair of outlets on the strip to prevent electrical noise interference between connected loads. Includes 2 filter banks.
Immunity Conforms to IEE 587 / ANSI C62.41
DATALINE SURGE SUPPRESSION
Telephone/DSL Protection No
Cable (Coax) Protection No
Network (Ethernet) Protection No
PHYSICAL
Unit Dimensions (hwd / in.) 3.5 x 7 x 2.5
Material of Construction Metal
Integrated Keyhole Mounting Tabs Metal end caps are fitted with keyhole mounting tabs for wallmount installation
Housing Color Light Gray
Receptacle Color Black
Color (AC Line Cord) Light Gray
Outlets Measurement (Center to Center) Distance between horizontal outlets = 53mm; Distance between vertical outlets = 38.10mm
Keyhole Slot Mounting Measurement (Center to Center) Distance between horizont tabs = 162.13mm; Distance between vertical tabs = 58.17mm
CERTIFICATIONS
Approvals CE
WARRANTY
Product Warranty Period (Worldwide) Lifetime limited warranty

Frequently Asked Questions

A surge protector will protect your electronics by acting as an “electrical sponge” by clamping down on spikes, “soaking them up” and converting the excess energy into heat, thus preventing the spikes from passing through the surge protector into the sensitive electronic devices and damaging them. As with any “sponge” a surge protector has a limited absorption capacity. Once that capacity is reached, the unit is no longer able to protect and must be replaced.
All outlets on a Tripp Lite surge protector are designed to pass power continuously, as controlled by the master or individual power switches, to connected equipment.

Follow these instructions in an attempt to restore normal operation:
1. Remove any equipment still connected to the unit.
2. Be sure that the master switch is in the Off position.
3. Unplug the unit from the AC power source.
4. Check the circuit breaker on the unit to make sure that it is reset.
5. Find an outlet that provides computer-grade 120V AC power. Check the outlet by plugging in a device, such as an alarm clock or radio, to verify that the outlet is passing power.
6. Plug the unit into the outlet.
7. Toggle the master switch and all other power switches to the On position.
8. One by one, connect a small device, such as an alarm clock or radio, to each outlet at the rear of the unit. Test the device to make sure that it is working properly at each outlet.

If the unit is not passing power from all outlets after these steps have been followed, the unit requires replacement.
Isobar surge protectors have the ability to minimize EMI (electromagnetic interference) and RFI (radio frequency interference) on the input AC line. However, a piece of equipment attached to the Isobar may still receive interference from other devices nearby.

Here are some common reasons why a device plugged into an Isobar may be receiving interference:
    -A second device that is plugged into the same filter bank as the device receiving interference may be causing the problem.
    -Another device in use nearby can cause interference through the air, not through the AC line.
    -The surge protector may have taken a surge hit and requires replacement.


Follow these steps to identify the problem:
1. Unplug the device that is receiving interference and plug it directly into a wall outlet. Test to make sure that the device is working properly.
2. If the device operates correctly, proceed to the next step. If it does not operate correctly, contact the manufacturer of the device to determine the problem. There may also be another device close by that is causing interference.
3. Remove any other devices connected to the Isobar where the first device was plugged in.
4. Plug the device that is receiving interference back in into the same outlet where it was previously connected to the Isobar. Test to make sure your connected device is working properly.

If you have followed these steps and the device still does not work properly, the Isobar requires replacement.


Additional FAQs may be available on the EURO-4 model support page.


Accessories

No accessories are available for this model.

Similar Products



Clear List