Platform Overview | SNMPWEBCARD Platform | LX Platform | TLNET Platform |
---|---|---|---|
Network Interface Products | SNMPWEBCARD, SNMPWEBCARD55, SRCOOLNET, SRCOOLNET2 | WEBCARDLX, SRCOOLNETLX, SRCOOLNET2LX | TLNETCARD |
Device Support | Nearly all slotted Tripp Lite devices, SRCOOL units, monitored and switched PDUs |
UPS: Most models
PDU: Slotted & "LX" models Cooling: Slotted SRCOOL units |
UPS: Most models |
Web Interface | PowerAlert (JRE) | PowerAlert Device Manager (HTML-5) | TLNET Supervisor (HTML-4) |
Sensors | ENVIROSENSE | EnviroSense (E2) daisy-chainable | TLNETEM |
Software | |||
PowerAlert Network Shutdown Agent | All Versions | Version 58 Onward | – |
PowerAlert Network Management System | All Versions | Version 58 Onward | – |
PowerAlert Local | PowerAlert Local operates independently of any webcard | ||
TLNET Shutdown Agent | – | – | Yes |
Support | |||
Utilities | |||
Device Configuration | PowerAlert Mass Configuration Utility | TLNET Configurator | |
Firmware Update | Power Alert Mass Updater Utility (or PANMS) | ||
MIBs | |||
TRIPPLITE_12X | Yes | – | Yes |
TRIPPLITE | Yes | Yes | Yes |
TRIPPLITE_PRODUCTS | – | Yes | – |
RFC-1628-USB | Yes | Yes | Yes |
Sensors | |||
ENVIROSENSE Sensor | Yes | – | – |
TLNETEM Sensor | – | – | Yes |
E2MT | – | Yes | – |
E2MTDI | – | Yes | – |
E2MTDO | – | Yes | – |
E2MTHDI | – | Yes | – |
Peripherals | |||
SRSWITCH | Yes | Yes | Yes |
Features & Capabilities | |||
Protocol/Interface | |||
HTTP / HTTPS | Yes | Yes | Yes |
Config. via Telnet / SSH | Yes | Yes | Yes |
Mgmt. via Telnet / SSH | Yes | Yes | – |
Command Line Interface | Yes | Yes | – |
SNMP v1 | Yes | Yes | Yes |
SNMP v2c | Yes | Yes | – |
SNMP v3 | Yes | Yes | Yes |
USB | – | Yes | – |
Modbus IP | – | – | Yes |
Serial | Yes | – | Yes |
IPv4, IPv6 | Yes | Yes | Yes |
NTP, DNS, SMTP, RADIUS | Yes | Yes | Yes |
Security | |||
Upload DSA / RSA Key | – | – | Yes |
Upload Auth. Public Key | – | – | Yes |
Upload SSL Certificate | – | – | Yes |
RADIUS | Yes | Yes | Limited |
Actions | |||
Schedule Ramp/Shed | Yes | Yes | – |
Schedule Self-Test | Yes | Yes | Yes |
Schedule Shutdown /Off | Yes | Yes | Yes |
Schedule Restart /On-Cycle | Yes | Yes | Yes |
Execute Ramp / Shed | Yes | Yes | Yes |
Test Email | Yes | – | Yes |
Simulate power fail/restore | – | – | Yes |
Control outlets | Yes | Yes | Yes |
FW update from GUI | – | Yes | Yes |
Config upload from GUI | – | – | Yes |
Supported Web Browsers | |||
Firefox | Yes | Yes | Yes |
Chrome | – | Yes | Yes |
IE | – | Yes | Yes |
Out-of-Box Setup | |||
DHCP | Yes | Yes | Yes |
Default IP Address | – | – | Yes |
Local Configuration | Serial | USB | Serial |
Static IP Setting | Config Cable | USB Config Cable | TLNET Configurator or Cable |
Logging | |||
Data | 1024 threshold crossings | 1024 threshold crossings | 15K+ time stamps |
Events | Yes, 1024 | Yes, 1024 | Yes, 1000 |
Accounting | Yes | Yes | Yes |
Retrieval of logs | Rotate/clear | Rotate/clear | Download |
Platform Overview | SNMPWEBCARD Platform | LX Platform | |
---|---|---|---|
Network Interface Products | SNMPWEBCARD, SNMPWEBCARD55, SRCOOLNET, SRCOOLNET2 | WEBCARDLX, SRCOOLNETLX, SRCOOLNET2LX | |
Device Support | Nearly all slotted Tripp Lite devices, SRCOOL units, monitored and switched PDUs |
UPS: Most models
PDU: Slotted & "LX" models Cooling: Slotted SRCOOL units |
|
Web Interface | PowerAlert (JRE) | PowerAlert Device Manager (HTML-5) | |
Sensors | ENVIROSENSE | EnviroSense (E2) daisy-chainable | |
Software | |||
PowerAlert Network Management System | All Versions | Version 58 Onward | |
PowerAlert Local | PowerAlert Local operates independently of any webcard | ||
TLIM 1.0 | Yes | Yes | |
Support | |||
Utilities | |||
Device Configuration | PowerAlert Mass Configuration Utility | ||
Firmware Update | Power Alert Mass Updater Utility (or PANMS) | ||
MIBs | |||
TIPPLITE_12X | Yes | – | |
TIPPLITE | Yes | Yes | |
TIPPLITE_PRODUCTS | – | Yes | |
RFC-1628-USB | Yes | Yes | |
Sensors | |||
ENVIROSENSE Sensor | Yes | – | |
TLNETEM Sensor | – | – | |
E2MT | – | Yes | |
E2MTDI | – | Yes | |
E2MTDO | – | Yes | |
E2MTHDI | – | Yes | |
Peripherals | |||
SRSWITCH | Yes | Yes | |
Features & Capabilities | |||
Protocol/Interface | |||
HTTP / HTTPS | Yes | Yes | |
Config. via Telnet / SSH | Yes | Yes | |
Mgmt. via Telnet / SSH | Yes | Yes | |
Command Line Interface | Yes | Yes | |
SNMP v1 | Yes | Yes | |
SNMP v2c | Yes | Yes | |
SNMP v3 | Yes | Yes | |
USB | – | Yes | |
Modbus IP | – | – | |
Serial | Yes | – | |
IPv4, IPv6 | Yes | Yes | |
NTP, DNS, SMTP, RADIUS | Yes | Yes | |
Security | |||
Upload DSA / RSA Key | – | – | |
Upload Auth. Public Key | – | – | |
Upload SSL Certificate | – | – | |
RADIUS | Yes | Yes | |
Actions | |||
Schedule Ramp/Shed | Yes | Yes | |
Schedule Self-Test | Yes | Yes | |
Schedule Shutdown /Off | Yes | Yes | |
Schedule Restart /On-Cycle | Yes | Yes | |
Execute Ramp / Shed | Yes | Yes | |
Test Email | Yes | – | |
Simulate power fail/restore | – | – | |
Control outlets | Yes | Yes | |
FW update from GUI | – | Yes | |
Config upload from GUI | – | – | |
Supported Web Browsers | |||
Firefox | Yes | Yes | |
Chrome | – | Yes | |
IE | – | Yes | |
Out-of-Box Setup | |||
DHCP | Yes | Yes | |
Default IP Address | – | – | |
Local Configuration | Serial | USB | |
Static IP Setting | Config Cable | USB Config Cable | |
Logging | |||
Data | 1024 threshold crossings | 1024 threshold crossings | |
Events | Yes, 1024 | Yes, 1024 | |
Accounting | Yes | Yes | |
Retrieval of logs | Rotate/clear | Rotate/clear |
Platform Overview | SNMPWEBCARD Platform | LX Platform |
---|---|---|
Network Interface Products | SNMPWEBCARD, SNMPWEBCARD55, SRCOOLNET, SRCOOLNET2 | WEBCARDLX, SRCOOLNETLX, SRCOOLNET2LX |
Device Support | Nearly all slotted Tripp Lite devices, SRCOOL units, monitored and switched PDUs |
UPS: Most models
PDU: Slotted & "LX" models Cooling: Slotted SRCOOL units |
Web Interface | PowerAlert (JRE) | PowerAlert Device Manager (HTML-5) |
Sensors | ENVIROSENSE | EnviroSense (E2) daisy-chainable |
Software | ||
PowerAlert Network Management System | All Versions | Version 58 Onward |
PowerAlert Local | PowerAlert Local operates independently of any webcard | |
TLIM 1.0 | Yes | Yes |
Support | ||
Utilities | ||
Device Configuration | PowerAlert Mass Configuration Utility | |
Firmware Update | Power Alert Mass Updater Utility (or PANMS) | |
MIBs | ||
TIPPLITE_12X | Yes | – |
TIPPLITE | Yes | Yes |
TIPPLITE_PRODUCTS | – | Yes |
RFC-1628-USB | Yes | Yes |
Sensors | ||
ENVIROSENSE Sensor | Yes | – |
TLNETEM Sensor | – | – |
E2MT | – | Yes |
E2MTDI | – | Yes |
E2MTDO | – | Yes |
E2MTHDI | – | Yes |
Peripherals | ||
SRSWITCH | Yes | Yes |
Features & Capabilities | ||
Protocol/Interface | ||
HTTP / HTTPS | Yes | Yes |
Config. via Telnet / SSH | Yes | Yes |
Mgmt. via Telnet / SSH | Yes | Yes |
Command Line Interface | Yes | Yes |
SNMP v1 | Yes | Yes |
SNMP v2c | Yes | Yes |
SNMP v3 | Yes | Yes |
USB | – | Yes |
Modbus IP | – | – |
Serial | Yes | – |
IPv4, IPv6 | Yes | Yes |
NTP, DNS, SMTP, RADIUS | Yes | Yes |
Security | ||
Upload DSA / RSA Key | – | – |
Upload Auth. Public Key | – | – |
Upload SSL Certificate | – | – |
RADIUS | Yes | Yes |
Actions | ||
Schedule Ramp/Shed | Yes | Yes |
Schedule Self-Test | Yes | Yes |
Schedule Shutdown /Off | Yes | Yes |
Schedule Restart /On-Cycle | Yes | Yes |
Execute Ramp / Shed | Yes | Yes |
Test Email | Yes | – |
Simulate power fail/restore | – | – |
Control outlets | Yes | Yes |
FW update from GUI | – | Yes |
Config upload from GUI | – | – |
Supported Web Browsers | ||
Firefox | Yes | Yes |
Chrome | – | Yes |
IE | – | Yes |
Out-of-Box Setup | ||
DHCP | Yes | Yes |
Default IP Address | – | – |
Local Configuration | Serial | USB |
Static IP Setting | Config Cable | USB Config Cable |
Logging | ||
Data | 1024 threshold crossings | 1024 threshold crossings |
Events | Yes, 1024 | Yes, 1024 |
Accounting | Yes | Yes |
Retrieval of logs | Rotate/clear | Rotate/clear |