N234-MI-1005 front view large image | Network Panels & Jacks

N234-MI-1005 back view large image | Network Panels & Jacks

N234-MI-1005 other view large image | Network Panels & Jacks

See All Images See All Images

Ethernet Network Isolator, Hospital-Grade, RJ45 for Patient Care Vicinity, IEC 60601-1

See All Images

Support PDF

Isolate medical devices connected to an Ethernet network to protect patients from dangerous leakage currents.

Isolates harmful leakage currents on a data network to protect patients and equipment
Meets IEC 60601-1 for use in patient care vicinities
Works with cost-effective, readily available Cat6 cables
Plug and play; does not require software, drivers or a power supply
Complies with TAA requirements

1-year limited warranty

View Full Product Details

Tripp Lite Part Number

N234-MI-1005

Write a review

CHECK PRICES

Add to Compare

Have a Question?

Customers Who Viewed This Product Also Considered

Features

Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety

Tripp Lite's N234-MI-1005 medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.

Comply with IEC 60601-1 for Use in the Patient Care Vicinity

The N234-MI-1005 complies with IEC 60601-1 and EMC/IEC 60601-1-2 safety standards for a network connection between a medical device and an Ethernet network or non-medical device (PC or laptop). Because it meets IEC 60601-1 standards, this medical network isolator can be used in patient care vicinities. For example, you can use this 60601-1 network isolator in the connection between a clinic's network and the PC of a prolonged EEG system. (Note: You can only connect network components that comply with IEEE 802.3 or IEEE 802.3ab. You cannot connect telecommunication appliances, voltage supplies or similar devices.)

Install In-Line on an Ethernet Network

This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.

Comply with TAA Requirements

The N234-MI-1005 complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

One-Year Warranty

The N234-MI-1005 is backed by a one-year warranty, ensuring reliability and performance.

Typical Applications

Isolate medical equipment connected to an Ethernet network to protect patients in patient care vicinities
Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
Connect the PC of a prolonged EEG system to a clinic’s network

Package Includes

N234-MI-1005 Medical Ethernet Isolator – For Patient Care Vicinity
Owner’s manual

System Requirements

Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
Cat6 network cable

Specifications

OVERVIEW

UPC Code	037332213792
Technology	Cat6

PHYSICAL

Color	Gray
Unit Dimensions (hwd / in.)	0.91 x 2.56 x 1.14
Unit Weight (lbs.)	0.11

ENVIRONMENTAL

Operating Temperature Range	14 to 185 F (-10 to 85 C)
Storage Temperature Range	-13 to 185 F (-25 to 85 C)
Operating Humidity Range	10% to 90% RH, Non-condensing
Storage Humidity Range	10% to 95% RH, Non-condensing
ESD Protection	16kV

COMMUNICATIONS

Network Compatibility	1 Gbps (Gigabit)
IEEE Standards Supported	802.3; 802.3ab

CONNECTIONS

Side A - Connector 1	RJ45 (FEMALE)
Side B - Connector 1	RJ45 (FEMALE)

STANDARDS & COMPLIANCE

Certifications

Tested to CE, RoHS, REACH, IEC 60601-1

WARRANTY

Product Warranty Period (Worldwide)

1-year limited warranty

Questions & Answers

Ask a Question

More Q&As may be available on the N234MI1005 model support page.

Customers Who Viewed This Product Also Considered

N235-001
Cat6 Straight Through Modular In-line Snap-in Coupler (RJ45 F/F), TAA

N254-024
24-Port 1U Rack-Mount Cat6/Cat5 Feedthrough Patch Panel, RJ45 Ethernet, TAA

;

(4)

N054-024
24-Port 1U Rack-Mount Cat5e Feedthrough Patch Panel, RJ45 Ethernet, TAA

N206-BC01-IND
RJ45 Bulkhead Coupler for Cat5/Cat6, Female to Female, Shielded, Industrial, Dust Cap - IP68, TAA

N206-KJ01-IND
Keystone Jack Cat6/Cat5e, RJ45, Shielded, Dust Cap, Industrial - 110 Punch Down, IP68, TAA

N235-001-6A
Cat6a Straight-Through Modular In-Line Snap-In Coupler (RJ45 F/F), TAA

N235-001-SH
Cat6 Straight Through Modular Shielded In-line Snap-in Coupler (RJ45 F/F), TAA

N235-001-SH-6A
Cat6a Straight-Through Modular Shielded In-Line Snap-In Coupler (RJ45 F/F), TAA

N235-001-SH-6AD
Cat6a Straight-Through Modular Shielded In-Line Snap-In Coupler with 90-Degree Down-Angled Port (RJ45 F/F), TAA

N235-001-SH-D
Cat6 Straight-Through Modular Shielded In-Line Snap-In Coupler with 90-Degree Down-Angled Port (RJ45 F/F)

N235-001-WH
Cat6 Straight-Through Modular In-Line Snap-In Coupler (RJ45 F/F), White, TAA

N235-001-WH-6AD
Cat6a Straight-Through Modular In-Line Snap-In Coupler with 90-Degree Down-Angled Port, White (RJ45 F/F)

N250-024-LP
24-Port Cat6/Cat5 Low Profile Feed-Through Patch Panel, 1U Rack-Mount/Wall-Mount, TAA

N254-024-6A
24-Port 1U Rack-Mount Cat6a Feedthrough Patch Panel, RJ45 Ethernet

Related Products

Copper Network Cables

Compare

	Model Number	Description
	N125-010-GY	Cat6 Gigabit Molded Shielded (FTP) Ethernet Cable (RJ45 M/M), Gray, 10 ft. (3.05 m)
	N201-003-GY	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Gray, 3 ft. (0.91 m)
	N201-006-GY	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Gray, 6 ft. (1.83 m)
	N201-010-GY	Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Gray, 10 ft. (3.05 m)
	N202-100-BL	Cat6 Gigabit Solid Conductor Snagless UTP Ethernet Cable (RJ45 M/M), Blue, 100 ft. (30.5 m)