Model Number: SMART2200CRMXL

SmartPro 120V 2.2kVA 1.9kW Line-Interactive Sine Wave UPS, 4U Short Depth, Extended Run, Network Card Options, USB, DB9

//prodzone-tripplite.netdna-ssl.com/shared/product-images/lg/SMART2200CRMXL-FRONT-L.jpg

 
  • 2.2kVA / 2200VA / 1900W line interactive 4U rack/tower UPS, Sine Wave
  • 120V output, Corrects brownouts and overvoltages from 83V to 145V
  • 0.9 Power Factor, Front panel status LEDs
  • Extended runtime options up to 1900W
  • 2 post mounting accessories, reduced depth housing
  • 97% line-mode efficiency, 3 switched load banks
  • USB, RS232, EPO and slot for Network Card options
  • 120V NEMA 5-20P input, 4 NEMA 5-15R & 4 NEMA 5-15/20R outlets
$1,10999

1533415

$96910

B001DETS6Y

$1,08999

SMART2200CRMXL

$1,10799

A2490867

$1,06599

02612447

$1,08985

8854246

$1,05599

7528840

$1,05599

7528840


Overview

Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply(UPS) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures. Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations. 97% line power mode efficiency saves operating costs over less efficient UPS types. Runtime is expandable with optional BP48V24-2U(limit 1), BP48V48RT4U(multi-pack compatible) and BP48V27-2US(multi-pack compatible) reduced-depth external battery packs.
SMART2200CRMXL 4U rackmount 2200VA/1900 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations. Line interactive Automatic Voltage Regulation(AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V. Includes NEMA 5-20P input plug, NEMA 5-15R and 5-15/20R output receptacles. Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional network management accessory card slot. Compatible Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD support a wide variety of UPS control and monitoring capabilities. Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to two directly connected contact closure sensors. HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X. Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once. Includes PowerAlert monitoring software with USB and serial cables. Emergency Power Off(EPO) interface. Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices. 3-stage metered current monitoring and battery charge status LEDs. Utility power and voltage regulation LEDs. Audible alarm. Self-test. 2-post rackmount accessories included; 2-9USTAND tower stands. Field-replaceable, hot-swappable internal batteries and external battery packs. Attractive all-black color scheme.

Features

  • Tripp Lite's SmartPro Compact Rackmount Uninterruptible Power Supply(UPS) offers line interactive voltage regulation, network grade surge suppression and long lasting battery support for critical network hardware during blackouts and extended power failures
  • Special reduced-depth housing, larger internal batteries, higher rated wattage and included 2 post rackmount installation hardware makes these systems ideal for network and telecom wiring closets and other limited-space installations
  • Runtime is expandable with optional BP48V24-2U(limit 1), BP48V48RT4U(multi-pack compatible) and BP48V27-2US(multi-pack compatible) reduced-depth external battery packs
  • Some external battery configurations require the use of Tripp Lite's External Battery Configur(see manual)
  • Intelligent battery management system extends battery life
  • SMART2200CRMXL 4U rackmount 2200VA/1900 watt UPS offers battery-derived sine wave AC output during power failures and extreme voltage variations
  • Line interactive Automatic Voltage Regulation(AVR) provides two levels of voltage boost during brownouts and one level of voltage cut during overvoltage conditions to maintain regulated 120V nominal output over an input range of 83-145V
  • Includes NEMA 5-20P input plug, NEMA 5-15R and 5-15/20R output receptacles
  • Network management interfaces support simultaneous communications via USB port, DB9 serial port and optional network management accessory card slot
  • Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX, SNMPWEBCARD and RELAYIOCARD
  • Additional ENVIROSENSE accessory, when used in conjunction with SNMPWEBCARD reports temperature, humidity and status of up to two directly connected contact closure sensors
  • HID-compliant USB interface enables full integration with built-in power management and auto shutdown features of Windows and Mac OS X
  • 97% efficiency in line power mode offers substantially lower operating costs than lower efficiency UPS types
  • Supports detailed monitoring of equipment load levels, self-test data and utility power conditions via all 3 network interfaces at once
  • Includes PowerAlert monitoring software with USB and serial cables
  • Emergency Power Off(EPO) interface
  • Integrated 3-bank programmable PDU switching supports load shedding and remote-reboot of up to 3 individual connected devices
  • 3-stage metered current monitoring and battery charge status LEDs; Utility power and voltage regulation LEDs; Audible alarm; Self-test
  • 2-post rackmount accessories included; 2-9USTAND tower stands available
  • Field-replaceable, hot-swappable internal batteries and external battery packs
  • Attractive all-black color scheme

Package Includes

  • SmartPro Compact 4U Rackmount UPS system
  • 2 post rackmount installation brackets
  • USB and Serial Cabling
  • Owner's manual
Cisco compatible
RoHS compliant
VMware ready application
Windows IT Pro Readers' Choice Award Runner Up
Windows IT Pro Community Choice Runner Up

Specifications

OUTPUT
Output Volt Amp Capacity (VA) 2200
Output kVA Capacity (kVA) 2.2
Output Watt Capacity (Watts) 1900
Output kW Capacity (kW) 1.9
Power Factor 0.86
Nominal Output Voltage(s) Supported 110V; 115V; 120V
Nominal Voltage Details 120v nominal output in battery mode
Frequency Compatibility 60 Hz
Output Voltage Regulation (Line Mode) -18%, +8%
Output Voltage Regulation (Battery Mode) +/- 5%
Output Receptacles (4) 5-15R; (4) 5-15/20R
Load Management Receptacles Three switchable single-outlet 5-15R load banks
Output AC Waveform (AC Mode) Sine wave
Output AC Waveform (Battery Mode) Pure Sine wave
INPUT
Rated input current (Maximum Load) 16A
Nominal Input Voltage(s) Supported 120V AC
UPS Input Connection Type 5-20P
Input Circuit Breakers 20A
UPS Input Cord Length (ft.) 10
Recommended Electrical Service 20A 120V
Input Phase Single-Phase
BATTERY
Full Load Runtime (min.) 11 min. (1900w)
Half Load Runtime (min.) 28 min. (950w)
Expandable Battery Runtime Extended runtime supported via optional external battery packs
External Battery Pack Compatibility BP48V24-2U(limit 1); BP48V48RT4U(multi-pack compatible); BP48V27-2US(multi-pack compatible)
DC System Voltage (VDC) 48
Battery Recharge Rate (Included Batteries) Less than 3.6 hours from 10% to 90% (typical, full load discharge)
Internal UPS Replacement Battery Cartridge RBC94-2U(quantity 2)
Battery Access Front panel battery access door
Battery Replacement Description Hot-swappable, user replaceable batteries
Expandable Runtime Yes
VOLTAGE REGULATION
Voltage Regulation Description Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 83 to 145
Overvoltage Correction Input voltages between 127 and 145 are reduced by 12%
Undervoltage Correction Input voltages between 96 and 108 are boosted by 12%
Severe Undervoltage Correction Input voltages between 83 and 95 are boosted by 24%
USER INTERFACE, ALERTS & CONTROLS
Switches 2 Switches control off/on power status and alarm-cancel/self-test operation; rear panel protected switches support low/high charger settings
Alarm Cancel Operation Power-fail alarm can be silenced using alarm-cancel switch; once silenced, alarm will re-sound to indicate low-battery status
Audible Alarm Audible alarm indicates power-failure, overload and low-battery conditions
LED Indicators 5 LEDs indicate line power, battery power, overload, voltage regulation and battery low/replace status
SURGE / NOISE SUPPRESSION
UPS AC Suppression Joule Rating 570
UPS AC Suppression Response Time Instantaneous
EMI / RFI AC Noise Suppression Yes
PHYSICAL
Included Mounting Accessory Description 2 post rackmount installation accessories included
Installation Form Factors Supported with Included Accessories 2 post 19 inch rackmount
Installation Form Factors Supported with Optional Accessories 4 post rackmount(4POSTRAILKIT); Tower(2-9USTAND)
Primary Form Factor Rackmount
UPS Power Module Dimensions (hwd, in.) 6.89 x 17.3 x 17.8
Rack Height (U Spaces) 4
Minimum Required Rack Depth (inches) 24.8
UPS Power Module Weight (lbs.) 100.3
UPS Shipping Dimensions (hwd / in.) 12.8 x 23.3 x 22.8
Shipping Weight (lbs.) 128.9
Cooling Method Fan
UPS Housing Material Steel
Minimum Required Rack Depth (mm) 630
Primary UPS Height (mm) 175
Primary UPS Width (mm) 439
Primary UPS Depth (mm) 452
Shipping Height (mm) 325
Shipping Width (mm) 592
Shipping Depth (mm) 579
ENVIRONMENTAL
Operating Temperature Range +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius
Storage Temperature Range +5 to +122 degrees Fahrenheit / -15 to +50 degrees Celsius
Relative Humidity 0 to 95%, non-condensing
AC Mode BTU / Hr. (Full Load) 242
AC Mode Efficiency Rating (100% Load) 97%
COMMUNICATIONS
Communications Interface USB (HID enabled); DB9 Serial; EPO (emergency power off); Slot for SNMP/Web interface
Network Monitoring Port Description Supports detailed monitoring of UPS and site power conditions
PowerAlert Software Included
Communications Cable USB and DB9 cabling included
WatchDog Compatibility Supports Watchdog application, OS and hard-reboot restart options for remote applications
LINE / BATTERY TRANSFER
Transfer Time 5 milliseconds
Low Voltage Transfer to Battery Power (Setpoint) 83
High Voltage Transfer to Battery Power (Setpoint) 145
SPECIAL FEATURES
Cold Start (Startup in Battery Mode During a Power Failure) Cold-start operation supported
High Availability UPS Features Hot swappable batteries
CERTIFICATIONS
UPS Certifications Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)
WARRANTY
Product Warranty Period (U.S. & Canada) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Product Warranty Period (International) 2-year limited warranty
Product Warranty Period (Mexico) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Product Warranty Period (Puerto Rico) 2-year warranty, 3 year with registration. Note: Registration is required for 3-year warranty.
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $250,000 Ultimate Lifetime Insurance

REVIEW SNAPSHOT®

by PowerReviews
Tripp LiteSmartPro 120V 2.2kVA 1.9kW Line-Interactive Sine Wave UPS 4U 2-Post Reduced-Depth Rackmount Extended Run SNMPWEBCARD Option USB DB9 Serial
 
5.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (1)

  • 4 Stars

     

    (0)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

 
5.0

Keeps the Power On

By Mover24

from Undisclosed

Comments about Tripp Lite SmartPro 120V 2.2kVA 1.9kW Line-Interactive Sine Wave UPS 4U 2-Post Reduced-Depth Rackmount Extended Run SNMPWEBCARD Option USB DB9 Serial:

Very good UPS for the price and great for my companies mini data center. Have had a couple brown outs in my industrial complex and it handled it as it should.

Be sure to opt for the web card if you want any sort of networking support.

Comment on this reviewHelp Icon


Accessories

BP48V27-2US
BP48V27-2US

External 48V 2U Rack/Tower Battery Pack for select UPS Systems (BP48V27-2US)

More... Prices
BP48V24-2U
BP48V24-2U

External 48V 2U Rack/Tower Battery Pack Enclosure + DC Cabling for select UPS Systems (BP48V24-2U)

More... Prices
BP48V48RT4U
BP48V48RT4U

External 48V 4U Battery Pack for select UPS Systems (BP48V48RT4U)

More... Prices
2-9USTAND
2-9USTAND

2U to 9U Tower Stand Kit for select Rack-Mount UPS Systems

More... Prices
4POSTRAILKIT
4POSTRAILKIT

4-Post Rack-Mount Installation Kit of select Rack-Mount UPS Systems

More... Prices
SNMPWEBCARD
SNMPWEBCARD

SNMP/Web Management Accessory Card, SmartPro or SmartOnline UPS Systems

More... Prices
ENVIROSENSE
ENVIROSENSE

EnviroSense Rack Environment Sensor, Temperature, Humidity, Contact-Closure Inputs

More... Prices
TLNETCARD
TLNETCARD

SNMP/Java-free Web Management Accessory Card for compatible Tripp Lite UPS Systems

More... Prices
TLNETEM
TLNETEM

Environmental Monitoring Sensor, Temperature, Humidity, Contact-Closure Inputs for Use with TLNETCARD

More... Prices
RELAYIOCARD
RELAYIOCARD

Programmable Relay I/O Card

More... Prices
WATCHDOGSW
WATCHDOGSW

WatchDog Service Monitoring / Reboot Software

More... Prices
PDUB20
PDUB20

1.9kW Single-Phase Hot-Swap PDU, 120V 20A Outlets (4-5-15R, 4-5-15/20R) 2 5-20P, 10ft & 6ft Cords 2U Rack-Mount

More... Prices
PDU1220
PDU1220

2.4kW Single-Phase 120V Basic PDU, 13 NEMA 5-15/20R Outlets, NEMA 5-20P Input, 15 ft. Cord, 1U Rack-Mount

More... Prices
PDUMH20
PDUMH20

1.92kW Single-Phase Metered PDU, 120V (12 5-15/20R), L5-20P / 5-20P, 110-127V Input, 15ft Cord, 1U Rack-Mount

More... Prices
PDUMV20
PDUMV20

1.9 kW Single-Phase Metered PDU, 120V Outlets (28 5-15/20R), L5-20P/5-20P Adapter, 15ft Cord, 0U Vertical

More... Prices
PDUMNH20
PDUMNH20

1.9kW Single-Phase Monitored PDU, 120V Outlets (8 5-15/20R), L5-20P/5-20P Adapter, 12ft Cord, 1U Rack-Mount, TAA

More... Prices
PDUMNV20
PDUMNV20

1.9kW Single-Phase Monitored PDU, 120V Outlets (24 5-15/20R), L5-20P/5-20P Adapter, 0U Vertical, 70 in., TAA

More... Prices
PDUMH20ATNET
PDUMH20ATNET

1.9kW Single-Phase ATS / Switched PDU, 120V (16 5-15/20R), 2 L5-20P / 5-20P Inputs, 2 12ft Cords, 1U Rack-Mount

More... Prices
PDUMV20NET
PDUMV20NET

1.9kW Single-Phase Switched PDU, 120V Outlets (24 5-15/20R), L5-20P/5-20P, 10ft Cord, 0U Vertical, TAA

More... Prices
P007-002
P007-002

Heavy-Duty Computer Power Cord, 15A, 14AWG (NEMA 5-15P to IEC-320-C13), 2-ft.

More... Prices
P007-006
P007-006

Heavy-Duty Computer Power Cord, 15A, 14AWG (NEMA 5-15P to IEC-320-C13), 6-ft.

More... Prices
P007-010
P007-010

Heavy-Duty Computer Power Cord, 15A, 14AWG (NEMA 5-15P to IEC-320-C13), 10-ft.

More... Prices
P044-06I
P044-06I

Heavy-Duty Power Adapter Cord, 20A, 12AWG (NEMA-L5-20R to NEMA-5-20P), 6-in.

More... Prices
P049-010
P049-010

Heavy-Duty Power Extension Cord, 20A, 12AWG (IEC-320-C19 to NEMA 5-20P), 10-ft.

More... Prices

Extended Warranties

WEXT1L
WEXT1L

1-Year Extended Warranty - For select Tripp Lite Products

More... Prices
WEXT2L
WEXT2L

2-Year Extended Warranty - For select Tripp Lite Products

More... Prices


Clear List