Product Status Discontinued on 3/13/2013 Model Number: SR42UBTD
42U SmartRack with Thermal Duct Premium Enclosure (includes doors and side panels)
Resources & Downloads
Product Warranty Period (Worldwide)
5-YEAR LIMITED WARRANTY
Tripp Lite warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for 5 years from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Tripp Lite will, subject to the foregoing terms and limitations, repair or replace the product, in its sole discretion, as your exclusive remedy for Tripp Lite's breach of its limited warranty.
Tripp Lite's Return Policy
Proof of Warranty Coverage
You must provide proof that the product is covered under warranty. This can be confirmed by the product's serial number or with proof of purchase in the form of an invoice or receipt from a Tripp Lite authorized dealer. If required, please include the proof of purchase invoice with your return. Warranties on Tripp Lite products begin on the date of your product purchase. Warranty coverage varies by product line. Specific warranty duration is outlined in the owner's manual that accompanies each unit.
You are responsible for all transportation, insurance, duties and other similar charges for returned products. Please use caution; shipping damages resulting from improper packaging will be your responsibility. We recommend using a reliable parcel or freight carrier who is capable of providing tracking information and proof of delivery. The proof of purchase, if required, and your RMA number must be inserted in the shipping carton before the carton is sealed.
Repair or Replacement
Tripp Lite will repair or replace the product at Tripp Lite's option and ship the repaired or replaced product back to you at no charge.
Products not accompanied by a valid RMA number will not be accepted. The RMA number must be enclosed with your product or be clearly visible on the outside of the packaging.
Request Return Authorization (RMA)
A Return Merchandise Authorization (RMA) number is required for all products returned to Tripp Lite for replacement under warranty. You should first consult with Tripp Lite Customer Service (for returns within North America) or International Service (for returns outside of North America) before requesting an RMA number to eliminate any unnecessary returns. You can start the process by clicking on the contact technical support button below. Once eligibility has been determined, the RMA number along with shipping instructions will be emailed to you. RMA numbers are valid for 14 days from the date of issuance. Products will only be accepted for return if a valid RMA number is clearly marked on the outside of the package. Tripp Lite does not accept product returns that are not under warranty. If you bought the wrong Tripp Lite product and want to return it, please do so at the place of purchase. Returns will be authorized in accordance with the following policies.
Parts & Accessories
|UPSHDEARKIT||Heavy-Duty 2-post Front Mounting Ear Kit|
Network Panels & Jacks
|N252-012||12-Port 1U Rack-Mount Cat6/Cat5 110 Patch Panel 568B, RJ45 Ethernet, TAA|
|N252-024||24-Port 1U Rack-Mount Cat6/Cat5 110 Patch Panel, 568B, RJ45 Ethernet, TAA|
|N252-048||48-Port 2U Rack-Mount Cat6/Cat5 110 Patch Panel, 568B, RJ45 Ethernet, TAA|
|B020-U08-19-IP||NetDirector 8-Port 1U Rack-Mount Console KVM Switch with 19-in. LCD and IP Remote Access|
|B021-000-17||1U Rack-Mount Console with 17-in. LCD|
|B021-000-19||1U Rack-Mount Console with 19-in. LCD|
|B040-008-19||NetController 8-Port 1U Rack-Mount Console KVM Switch with 19-in. LCD|
|B040-016-19||NetController 16-Port 1U Rack-Mount Console KVM Switch with 19-in. LCD|
|SR1UPANEL50||1U Blanking Panel Kit, Toolless-Mounting, 50 pieces|
|SRBOLTDOWN||SmartRack Bolt-Down Kit - Secures stabilizing brackets or plates to facility floor|
|SRCAGENUTS||SmartRack Square Hole Hardware Kit with 50 M6 screws and washers|
|SRCOMBO||SmartRack Door Handles with Combination Lock - 2-pack for front and rear doors with bypass key|
|SREXTENDER||SmartRack Rack Enclosure Extension Frame - Increases rack external & maximum mounting depth|
|SRSHELF4PHD||SmartRack Heavy-Duty Fixed Shelf (250 lbs / 113.4 kgs capacity; 26 in/660 mm depth)|
|SRSHELF4PKYBD||SmartRack Keyboard Shelf (25 lbs / 11.3 kgs capacity; 16 in / 406 mm depth)|
|SRSHELF4PSL||SmartRack Standard Sliding Shelf (50 lbs / 22.7 kgs capacity; 28.3 in/719 mm depth)|
|SRSHELF4PSLHD||SmartRack Heavy-Duty Sliding Shelf (200 lbs / 90.7 kgs capacity; 28.3 in/719 mm depth.)|
|SRSTABILIZE||SmartRack Anti-Tip Stabilizing Plate Kit - Provides extra stability for standalone enclosures|
|SRSWITCH||SmartRack Magnetic Door Switch Kit for front and rear doors; requires ENVIROSENSE, TLNETEM, E2MTHDI or E2MTDI|
|SRVRTBAR||SmartRack 42U Vertical Cable Management Bars|
Server Rack Cooling
|SRFAN3U||SmartRack 3U Fan Panel - 3-120V high-performance fans; 210 CFM; 5-15P plug|
|SRXFAN3U||SmartRack 3U Fan Panel - 3 208-240V high-performance fans; 315 CFM; C14 inlet|
Rack Cooling Accessories
|SR1UPANEL10||1U Blanking Panel Kit, Toolless-Mounting, 10 pieces|
|SRCABLEDUCT1U||SmartRack 1U Horizontal Cable Manager - Finger duct with cover|
|SRCABLEDUCT1UHD||SmartRack 1U High Capacity Horizontal Cable Manager - Finger duct with dual-hinge cover|
|SRCABLEDUCT2UHD||SmartRack 2U High Capacity Horizontal Cable Manager - Finger duct with dual-hinge cover|
|SRCABLEDUCTVRT||SmartRack 6 ft. (1.83 m) Vertical Cable Manager - Double finger duct with cover & toolless mounting|
|SRCABLERING1U||SmartRack 1U Horizontal Cable Manager - Flexible ring type|
|SRCABLERING2U||SmartRack 2U Horizontal Cable Manager - Flexible ring type|