Hardened Gigabit Fiber to Ethernet Media Converter, 10/100/1000 Mbps, RJ45/SC Singlemode, -10° to 60°C, 10 km (6.2 mi.)
Extends a 10/100/1000 Mbps Gigabit Ethernet network connection over SC duplex singlemode fiber optic cable up to 10 kilometers.
- Extends up to 1000 Mbps (1 Gbps) of data to a network device up to 10 km away
- Automatic MDI/MDI-X configuration connects devices without crossover cabling
- Hardened aluminum housing withstands operating temperature range of -10° to 60°C
- LEDs indicate Ethernet connection and various statuses, including data transfer speed
- Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
- 2-year limited warranty
Extends a Network Connection up to 10 km over SC Singlemode Fiber Optic Cable
This network media converter converts a copper Gigabit Ethernet signal to a singlemode fiber optic signal and extends it to a second network device up to 10 kilometers (6.2 miles) away. Because copper Cat5e/6 cables are limited to only 100 meters, it is more effective to couple the N785-H01-SCSM with singlemode fiber cable to reach hubs, switches and other network devices located farther away. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
Monitor Your Installation with Link Fault Signaling and Loop Back Functions
Determine the health of your network connection via the Link Fault Signaling (LFS) and Loop Back functions. The LFS LED indicates when a copper or fiber cable has been severed or another cause of disruption in service has occurred. The Local Loop Back (LLB) and Remote Loop Back (RLB) functions ensure copper and fiber cables have been correctly installed. Use the DIP switches to control each function or turn them on or off.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential status information, including network speed and connection, LFS diagnostics and unit power.
Protective Metal Housing Built to Withstand a Variety of Hazards
The hardened aluminum case is designed to operate in extreme temperatures ranging from -10 to 60 degrees Celsius (14 to 140 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for wall or DIN mounting.
Works in Tandem with Tripp Lite’s N785-CH12 Chassis
House and power up to 12 Tripp Lite media converters, including the N785-H01-SCSM, using the N785-CH12 12-port chassis (sold separately) to create an organized installation.
TAA-Compliant for GSA Schedule Purchases
The N785-H01-SCSM is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
|Product Type||Fiber to Ethernet|
|Technology||Cat5/5e; Cat6; Cat6a; PoE; Singlemode|
|Accessories (Included)||External Power Supply (Input: 100-240V, 50/60Hz, 0.5A; Output: 12V/1.5A), Mounting Bracket, Mounting Hardware, DIN Rail, SC Connector Cap, L-Shape Holder, Rubber Foot|
|Network Ports||RJ45 (FEMALE); SC (FEMALE)|
|AC Adapter||Input: 100-240V, 50/60Hz, 0.5A; Output: 12V, 1.5A|
|External Power Supply Input Specs (V / Hz / A)||100-240V, 50/60Hz, 0.5A|
|External Power Supply Output Specs (V / A)||12V/1.5A|
|External Power Supply Cord Length (ft.)||3.94|
|External Power Supply Cord Length (m.)||1.2|
|DC Barrel Plug||OD: 5.5 x 2.5 x 11mm, Positive Pin, Negative Sleeve|
|Power Consumption (Watts)||1.80|
|External Power Supply Plug(s)||NEMA 1-15P North America|
USER INTERFACE, ALERTS & CONTROLS
|LED Indicators||PWR (Power), ALM (LFS function indicator), Fiber - 1000 (For Ethernet speed 1000Mbps), LNK/ACT (For Fiber port data transmitting/receiving), RJ45 - 1000 (For RJ45 speed 1000Mbps), LNK/ACT (For Copper port data transmitting/rec)|
|Power Cord Color||Black|
|Unit Dimensions (hwd / in.)||0.92 x 2.91 x 4.3|
|Unit Packaging Type||Box|
|Unit Weight (lbs.)||0.5267|
|Operating Temperature Range||14 to 140F (-10 to 60C)|
|Storage Temperature Range||-40 to 185F (-40 to 85C)|
|Relative Humidity||5% to 95% RH, Non Condensing|
|Network Compatibility||10 Mbps; 100 Mbps (Fast Ethernet); 1 Gbps (Gigabit)|
|Network Speed Details||10 Mbps; 100 Mbps; 1000 Mbps|
|Transmission Distance||10 km|
|IEEE Standards Supported||802.3; 802.3ab; 802.3u; 802.3z|
|Wavelength Division Multiplexing (WDM)||Yes|
|Side A - Connector 1||RJ45 (FEMALE)|
|Side B - Connector 1||SC (FEMALE)|
FEATURES & SPECIFICATIONS
|Data Transfer Rate||1 Gbps; 10 Mbps; 100 Mbps|
|Auto MDIX Support||Yes|
|Mounting Accessory Included||Yes|
STANDARDS & COMPLIANCE
|Certifications||CE, FCC, RoHS|
|External Power Supply Certifications||FCC; LPS; RoHS; UL; WEEE; cUL|
|Product Warranty Period (Worldwide)||2-year limited warranty|
Copper Network Cables
|N001-003-BL||Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M) - Blue, 3 ft. (0.91 m)|
|N001-006-BL||Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M) - Blue, 6 ft. (1.83 m)|
|N001-010-BL||Cat5e 350 MHz Snagless Molded (UTP) Ethernet Cable (RJ45 M/M) - Blue, 10 ft. (3.05 m)|
|N201-003-BL||Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Blue, 3 ft. (0.91 m)|
|N201-006-BL||Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Blue, 6 ft. (1.83 m)|
|N201-010-BL||Cat6 Gigabit Snagless Molded (UTP) Ethernet Cable (RJ45 M/M), Blue, 10 ft. (3.05 m)|
Fiber Network Cables
|N356-01M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 1M (3 ft.)|
|N356-03M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 3M (10 ft.)|
|N356-05M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 5M (16 ft.)|
|N356-10M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 10M (33 ft.)|
|N356-15M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 15M (50 ft.)|
|N356-30M||Duplex Singlemode 9/125 Fiber Patch Cable (SC/SC), 30M (100 ft.)|
Documents & Downloads
How can we improve the information on this page?
Is an important specification missing? Did you spot an error? Please let us know how we can make this information more useful to you.