Model Number: B070-016-19-IP

NetCommander 16-Port Cat5 1U Rack-Mount 1+1 User Console KVM Switch with 19-in. LCD and IP Remote Access

//prodzone-tripplite.netdna-ssl.com/shared/product-images/lg/B07001619IP-FRONT-L.jpg

 
Control up to 16 computers from virtually anywhere with one Cat5 KVM switch with integrated console. This KVM switch with IP remote access is a smart solution for efficient server control. Low-cost Cat5 cables let you locate servers up to 100 ft. away.
  • Control computers/servers locally or via LAN, WAN or Internet
  • Occupies just 1U of space in a rack-mountable drawer
  • Low-cost Cat5 cabling allows longer distances, reduces cable clutter
  • 19” LCD screen supports video resolutions up to 1366 x 768
  • Simultaneous support for 2 users – 1 local, 1 remote
  • Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases
  • Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's (B070 and B072 IP series) from a single interface
  • Fast Virtual Media KVM System patented under Pat. No. US 9,417,720
$1,89299

02920448

$1,31500

10143443

$1,37999

7879245

$1,20499

17-404-066

$1,37999

7879245

$1,20499

B002LARX3O

$1,31799

1824988

$1,31799

B070-016-19-IP

$1,79999

A3013908

NetCommander® Multi-User Cat5 IP KVM Switches

Overview

Tripp Lite’s B070-016-19-IP KVM Switch gives you a rack-mountable full keyboard, LCD and touchpad in a single console that occupies only 1U of rack space. Easy to install and use, it’s the optimal solution for controlling up to 16 computers/servers locally, from across the room, down the street or halfway around the globe on a LAN, WAN or Internet.

The B070-016-19-IP uses inexpensive, user-supplied Cat5e/6/6a cabling with Server Interface Units so you can control computers/servers located up to 100 ft. away from the switch. This switch features two 10/100 Mbps LAN ports, so if one fails, the other takes over, keeping remote access uninterrupted. Users can switch easily between the 16 ports using an on-screen display (OSD). Multi-level password protection prohibits unauthorized users from accessing the connected computers, and a local user and a remote user can be logged on simultaneously. The built-in 19” LCD screen supports video resolutions up to 1366 x 768.

Two serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers; you can assign individual ports to an IP PDU port to power on/off the server connected to that port. The B070-016-19-IP stores neatly in a rack drawer and pulls out when needed. This KVM console is compatible with both Windows and Linux operating systems. Heavy-duty steel housing stands up to frequent use. Complies with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases.

Free NetCommander-AXS Management Software is available for access and control of all of your Tripp Lite NetCommander IP KVM switches (B070 and B072 series). From a single interface, you can access server ports on any of your KVM switches, power cycle or power on/off outlets of IP PDU's, and manage KVM settings. This software can be found on the model support page of the B070-016-19-IP, or via searching NetCommander-AXS on www.tripplite.com

Features

Saves Space and Money
  • Combines 16-port KVM switch, 19” LCD screen, keyboard and touchpad in a single 1U rack-mountable drawer
  • Mounts into 19”-wide rack, 27”-42” deep; to mount in a 2-post rack, use Tripp Lite’s B019-000
  • Inexpensive Cat5e/6/6a cabling lets you locate servers up to 100 ft. from the switch
  • Use a Server Interface Unit, B078-101-USB-1(for USB) with each server that will be connected with Cat5 cable

IP Remote Access for Fewer Trips to the Server Room
  • Remote access means there’s no need to travel to the server room or network closet
  • Java-based application allows access via web browser; non-browser client that can bypass browser-related Java Security prompts is available
  • 1 local + 1 remote user can access different ports concurrently; up to 5 users can share a single session
  • Supports both IPv4 and IPv6
  • Free Management Software available to Access and Control all of your Tripp Lite NetCommander IP KVM's(B070 and B072 IP series) from a single interface

Simplifies IT Tasks
  • On-screen display, hot keys and remote toolbar for easy use
  • 2 serial ports allow control of serial-manageable devices such as IP PDUs, firewalls and routers
  • Add IP PDUs as devices that can be controlled by the KVM; assign individual ports to an IP PDU port to power on/off the server connected to that port
  • Virtual Media allows a.iso file to be mounted to a target server and accessed as if it were directly stored on it
  • Fast Virtual Media KVM System patented under Pat. No. US 9,417,720
  • System-sent messages to SNMP server notify you of LAN failures
  • Supports RADIUS and LDAP/S authentication
  • Log tracks events on your installation

Large 19” LCD

  • Supports video resolutions up to 1366 x 768; 1920 x 1080 remotely
  • DDC emulation allows for optimal output to LCD

Advanced Security Features
  • Multi-level password protection: create administrator accounts with full access and user accounts with limited access
  • 128-bit AES and HTTPS encryption for highest security standards
  • You can install SSL certificates to ensure secure transactions between web servers and browsers

Long-Lasting Reliability
  • Flash-upgradeable firmware over the network
  • Heavy-duty steel housing stands up to use

TAA Compliant
  • Complies with the Federal Trade Agreements Act for GSA Schedule purchases

System Requirements

  • Computer with HD15 port, and USB port or PS/2 keyboard/mouse ports
  • User-supplied Cat 5e/6/6a cabling
  • B078-101-USB-1(USB) or B078-101-USB2(USB) Server Interface Unit is required for each connected computer/server; the B078-101-USB2 is required for Fast Virtual Media speeds up to 12Mbps; the B078-101-USB-1 can be used for Virtual Media, but only at speeds up to 1Mbps
  • Compatible with Windows and Linux operating systems
  • Remote console computers require minimum Pentium 4 with 2 GB memory
  • Hardware versions: A new hardware version(v2) of the B070-016-19-IP was released in 2014, and it requires different firmware than was used in the previous version(v1). In the Support tab on this web page you will find a zip folder for the v1 KVM. In addition to including the applicable firmware, it contains a FW Notes file that will tell you how to determine which hardware version you have, and therefore, which firmware you need to use. If you have a v2 KVM, the latest firmware is that which came pre-installed on the KVM.
  • Power consumption: 120V, 60Hz, 30W

Package Includes

  • B070-016-19-IP 1U rackmount console KVM switch with 19” LCD
  • C13 to 5-15P power cord
  • Rackmount hardware
  • CD with owner's manual
  • Quick start guide
TAA compliant
RoHS compliant
IP KVM hands on demo
NetCommander-AXS software

Specifications

OVERVIEW
Users 2
Console Yes
INPUT
Nominal Input Voltage(s) Supported 100V AC; 110V AC; 115V AC; 120V AC; 127V AC; 140V AC; 200V AC; 208V AC; 220V AC; 230V AC; 240V AC
Electrical Consumption (Line Mode) 30W / (Standby Mode) 5W
Nominal Input Voltage Description Internal Switching 100-240 VAC 50/60Hz
Input Frequency 50/60Hz
Input Current 120V (1.2A) / 230V (0.7A)
PHYSICAL
Unit Dimensions (hwd / in.) 1.71 x 17.36 x 28.43
Unit Weight (lbs.) 28.78
Color Black
LCD Monitor (in.) 19
ENVIRONMENTAL
Storage Temperature Range -20 to 60 C (-4 to 140 F)
Relative Humidity 0 to 80% RH, Non-Condensing
Operating Temperature 0 to 40 C (32 to 104 F)
BTUs (Line Mode) 102 BTU/Hr / (Standby Mode) 17.06 BTU/Hr
COMMUNICATIONS
Port Control Hotkeys, OSD, Remote Toolbar
IP Remote Access Yes
CONNECTIONS
Ports 16
PC/Server Connections VGA; USB; PS/2
SPECIAL FEATURES
Cat5 KVM Switch Yes
FEATURES & SPECIFICATIONS
Autoscan (Y,N) N
CERTIFICATIONS
Certifications UL 60950-1 (USA), CAN/CSA (Canada), FCC Part 15 Class A, CE, IEC 60950-1
WARRANTY
Product Warranty Period (Worldwide) 1-year limited warranty

REVIEW SNAPSHOT®

by PowerReviews
Tripp LiteNetCommander 16-Port Cat5 1U Rack-Mount 1+1 User Console KVM Switch with 19-in. LCD and IP Remote Access
 
4.0

(based on 1 review)

Ratings Distribution

  • 5 Stars

     

    (0)

  • 4 Stars

     

    (1)

  • 3 Stars

     

    (0)

  • 2 Stars

     

    (0)

  • 1 Stars

     

    (0)

Reviewed by 1 customer

Displaying review 1

Back to top

(0 of 1 customers found this review helpful)

 
4.0

Nice all in one 1u IP KVM

By WarLordEli

from Undisclosed

Comments about Tripp Lite NetCommander 16-Port Cat5 1U Rack-Mount 1+1 User Console KVM Switch with 19-in. LCD and IP Remote Access:

Unlike our Dell and HP IPKVMs this unit takes up only 1u and works great with USB. Would be nice to have a passthrough USB port so took off one star for that.

Comment on this reviewHelp Icon


Accessories

B078-101-PS2
B078-101-PS2

NetCommander PS2 Server Interface Unit (SIU)

More... Prices
B078-101-USB-1
B078-101-USB-1

NetCommander USB Server Interface Unit (SIU) - Single

More... Prices
B078-101-USB-8
B078-101-USB-8

NetCommander USB Server Interface Unit (SIU) - 8-Pack

More... Prices
B078-101-USB2
B078-101-USB2

NetCommander USB Server Interface Unit (SIU) with Virtual Media up to 12Mbps

More... Prices
N125-007-GY
N125-007-GY

Cat6 Gigabit Molded Shielded Patch Cable STP (RJ45 M/M) - Gray, 7-ft.

More... Prices
N125-010-GY
N125-010-GY

Cat6 Gigabit Molded Shielded Patch Cable STP (RJ45 M/M) - Gray, 10-ft.

More... Prices
N125-025-GY
N125-025-GY

Cat6 Gigabit Molded Shielded Patch Cable STP (RJ45 M/M) - Gray, 25-ft.

More... Prices
N125-050-GY
N125-050-GY

Cat6 Gigabit Molded Shielded Patch Cable STP (RJ45 M/M) - Gray, 50-ft.

More... Prices

Similar Products

Extended Warranties

WEXT1P
WEXT1P

1-Year Extended Warranty - For select Tripp Lite Products

More... Prices
WEXT2P
WEXT2P

2-Year Extended Warranty - For select Tripp Lite Products

More... Prices
WEXT3P
WEXT3P

3-Year Extended Warranty - For select Tripp Lite Products

More... Prices


Find more products by tag:


Clear List