Model Number: SK6-0B

6-Outlet Surge Protector, Direct Plug-In, 540 Joules, Diagnostic LED, Black Casing

//prodzone-tripplite.netdna-ssl.com/shared/product-images/lg/SK60B-FRONT-L.jpg

 
  • 6 outlets/direct plug-in
  • 540 joule rating
  • $10,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
$1399

7739377

$1399

7739377

$1383

TRP90K6

$1999

12-120-550

$1399

02831054

$1599

1667826

$1699

B001Q3MA76

$1699

A8239850

$1458

9371908


Overview

The SK6-0B Surge Suppressor is ideal for protecting audio/video devices and printers. This direct plug-in surge suppressor features 6 outlets and 540 joules of surge energy absorption. $10,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only).

Features

  • 6 outlets: direct plug-in
  • Surge energy absorption: 540 joules; 27,000 amps
  • $10,000 Ultimate Lifetime Insurance (U.S., Canada, and Puerto Rico only)
  • Automatic shutoff cuts power to outlets when the protection circuit has been compromised

Package Includes

  • SK6-0B Surge Suppressor
  • Warranty information
  • Instruction manual
RoHS compliant

Specifications

OUTPUT
Frequency Compatibility 50 / 60 Hz
Output Receptacles (6) 5-15R
Output (Watts) 1800
Circuit Breaker (amps) 15
Transformer Accommodation Holds up to 4 large transformer plugs
Right-Angle Outlets No
INPUT
Nominal Input Voltage(s) Supported 120V AC
Recommended Electrical Service 120V
Input Connection Type NEMA 5-15P input plug
Input Plug Features 120V, 15A
Input Cord Length (ft.) 0
Input Cord Length Details Direct Plug-In
Voltage Compatibility (VAC) 120
Maximum Surge Amps 36000
Right-Angle Plug No
SURGE / NOISE SUPPRESSION
AC Suppression Joule Rating 540
AC Suppression Response Time < 1ns
Protection Modes Includes full normal mode (H-N) and common mode (N-G / H-G) line suppression
Clamping Voltage (RMS) 150
AC Suppression Surge Current Rating 27,000
UL1449 Let Through Rating 400, 500, 500
Immunity Conforms to IEE 587/ANSI C62.41
DATALINE SURGE SUPPRESSION
Telephone/DSL Protection No
Cable (Coax) Protection No
Network (Ethernet) Protection No
PHYSICAL
Shipping Dimensions (hwd / in.) 9.28 x 6.72 x 2.60
Shipping Weight (lbs.) .55
Unit Dimensions (hwd / in.) 4.8 x 4.6 x 1.2
Unit Weight (lbs.) .406
Material of Construction Plastic
Integrated Keyhole Mounting Tabs Direct plug-in suppressor mounts directly to a wall receptacle
Housing Color Black
Receptacle Color Black
Outlets Measurement (Center to Center) Distance between horizontal outlets = 25.2mm; Distance between vertical outlets = 39mm
CERTIFICATIONS
UL1449 3rd Edition (AC Suppression) UL 1449 3rd Edition
Approvals Exceeds IEEE 587 category A&B specifications
WARRANTY
Product Warranty Period (Worldwide) Lifetime limited warranty
Connected Equipment Insurance (U.S., Canada & Puerto Rico) $10,000 Ultimate Lifetime Insurance

Frequently Asked Questions

A surge protector will protect your electronics by acting as an “electrical sponge” by clamping down on spikes, “soaking them up” and converting the excess energy into heat, thus preventing the spikes from passing through the surge protector into the sensitive electronic devices and damaging them. As with any “sponge” a surge protector has a limited absorption capacity. Once that capacity is reached, the unit is no longer able to protect and must be replaced.
Your Tripp Lite surge protector is designed to pass power continuously to the electronic devices plugged into it when used under normal operating conditions as instructed in the owner’s manual.

There are several common reasons why the unit may not pass power:

    -Your unit was hit by a power surge, causing the internal components, as designed, to absorb the damage and protect the connected equipment.
    -The wall outlet to which the unit is connected is not passing power.
    -The surge protector is not fully plugged into an AC source.


Follow these instructions in an attempt to restore normal operation:

1. Remove any equipment still plugged into the unit.
2. Unplug the unit from the AC power source.
3. Check the AC power source by plugging in a different device to verify that the outlet is passing power. If the outlet is working, plug in the surge protector. The surge protector requires a working 120V AC power source that provides computer-grade power.
4. Connect a small device, such as an alarm clock or radio, to the surge protector to test if the unit is passing power.

If you followed these steps and the surge protector is still not passing power, then the unit requires replacement.


Additional FAQs may be available on the SK6-0B model support page.


Accessories

No accessories are available for this model.

Similar Products


Support for SK6-0B
Do you own a
SK6-0B?

Get support for your product all in one place!


Clear List